ColorLive [Two-Dimensional Color and Luminance Meter]
ColorLive is used to measure the luminance and chromaticity of flat panel displays (FPD) such as liquid crystal displays, organic EL displays, and e-paper.
While having excellent color reproduction with little noise, it can also measure light sources and objects with low brightness.
High measurement accuracy is achieved by retaining and switching the correction factors suitable for light sources.
Features
- Easy start with USB connection
- Wide measurement range from low to high luminance
- Automatic pass/fail judgment on production line
- Software customization to enable external control is also possible.
Specifications
Measuring specifications
Name and No. | ColorLive CL-300 | |
Lens | Focal length 12.5mm | |
Camera | 2.35million pixel (1936×1216 pixel) 1/1.2 inch CMOS sensor | |
Resolution of camera | RGB 4096 gradations each(12bit each) | |
Luminance measurement range(*1) | Type L 0.1 ~ 30,000 cd/㎡ | |
Type H 5 ~ 800,000 cd/㎡ | ||
Luminance linearity(*1) | ±3% | |
Chromaticity accuracy(*1) | ±0.005 | |
Repeat accuracy(*1 *2) | Luminance | ±0.5% |
Chromaticity | ±0.003 | |
Uniformity(*1 *3) | Luminance | ±2% |
Chromaticity | ±0.003 |
*1 Based on white point of the white standard light source D65 of RGB backlight at the time of pre-shipment calibration.
*2 Value in 10 iterations.
*3 Value at 81 points within 90% range of camera image.
Operating environment
CPU | Intel Core i3 2.0GHz or higher |
Memory | 2GB or more At least 300MB of free physical memory is needed at program execution. |
HDD | More than 500MB of free space is needed when installing. |
OS | Windows7 32bit/64bit Windows8 32bit/64bit Windows10 32bit/64bit |
USB | Support USB3.0 and 2.0. Recommended 3.0 port if available. |
Recommended to connect to USB controller with built-in Intel chipset. | |
Monitor | XGA(1024×768)or better resolution |
Recommended SXGA(1280×1024)or better resolution with bigger than 17 inches display | |
Environmental condition | 0~35℃(20~80%RH with no condensation) |